ACCESSORIES AND TOOLS
TOOLING
Nibbler #JN1601
Clean and precise cuts of corrugated metal panels.
Heavy duty shear / Turboshear
This attachment mounts easily in the chuck of an electric or cordless drill and makes fast cross, longitudinal, rounds, and square cuts in any type of siding.
Bender for l'Ancestral
For bends up to 1 ½” deep and 24” long in material 22 ga maximum.
Magnetic power nut drivers
Available dimensions:
1/4” x 2 9/16”
5/16” x 2 9/16”
3/8” x 2 9/16”
Steel circular saw blade
Blade with tough c-6 carbide teeth compatible with all brands of portable circular saw.
Makes straight cuts in corrugated siding without burning the paint or protective coating.
Bender 10'6”
This hand-operated bender will make the job quicker. Cutting blade included.
Cutting blade included
Other accessories available:
Supporting legs: can be mounted in seconds without the need of any tool.
Uncoiler: mounts directly on the bender in the provided space.
Cutting blade: replacement item
Manual Guillotine
This tool makes cuts in Le Distinction siding without any filings that can damage the paint.
COMPLIMENTARY ITEMS
Wood self-threading screws
#9 Polyseal screws
1/4” hex head with washer
Available lengths: 1” (for walls) and 2” (for roofs)
#14 Polyseal screws
3/8” hex head with washer
Length: 2"
#8 Screws
Truss head and Philipps drive
Length: 1"
L'Ancestral #10 screws « Pancake »
Length: 1"
#9 Polyseal screws with stainless steel head
Lengths available: 1” and 2”
1/4” hex head with washer
Le Distinction #8 screws
Length: 1-1/8"
Self-drilling screws
#8 Screws
Self-drilling, Truss head and Philipps drive
Length: 1/2"
#12 Screws
5/16″ hex head with washer
Length: 1"
#14 Screws
5/16″ hex head with washer
Length: 7/8"
#8 Le Distinction screws
Length: 1/2″
ROOF COMPLEMENTS
Polyethylene foam closure
Available for different metallic profiles
Compressible adhesive foam closure (PVC)
1″ x 1″ x 20’
Compressible closure (PVC)
1″ x 1 1/2″ x 15’
Butyl tape
Dimensions :
1/16″ x 1/4″ x 30′
1/8″ x 1/2″ x 40′
Self-adhesive thermal tape
Dimensions :
1/16″ x 1 1/4″ x 200′
1/8″ x 1 1/2″ x 100′
Roof vent flashing MF4
Dimensions :
2″ to 6″
Chimney flashing MF8
Dimensions :
7″ to 13″
Electrical service mast flashing MFRF-101
Dimensions :
1/2″ to 4″
FT Platinum roofing underlayment
Dimensions :
4’ x 250’
FT Platinum HT-SH (HTB) PSU self-adhesive underlayment
Dimensions :
3’ x 67’
Roof snow guards A-D
(4 ‘’ x 3’’)
Snow deflector DM-10
Length : 10′ – Steel gauge : 26
Supports, rods and screws included
1 hole
2 hole
3 hole
MISCELLANEOUS
Touch-up paint
Paint brush included
Capacity: 5 oz
*Strongly recommended to comply with the warranty requirements
Sealer cartridge tube
Silicone or thermoplastic
Butyl sealer cartridge tube
Synthetic rubber
Aluminum colour
WARNING : Some metal products may contain elements or chemicals known to the State of California to cause cancer, birth defects or reproductive harm. These elements include but are not limited to Chromium, Titanium Oxide and Crystallized Silica. For more information visit: www.P65Warnings.ca.gov